Hot Leathers Live Fast – Die Old 12″ X 3″ Bottom Rocker Patch PPM5197
Original price was: $21.95.$10.00Current price is: $10.00.
All Hot Leathers patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
– Identify where you want the patch and outline the area with tailor’s chalk
– Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
– Position your inside hand so it is resting flat between the lining and outlines area
– Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
– Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
– This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
– Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
– Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
– Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
– Preheat your iron to 325-335 degrees. Do Not Use Steam.
– Press the area where you want your patch to be for 25 seconds
– Position the patch on the garment so that it is positioned where you would like it to be
– Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure on the area for 15 seconds
– The iron should never come into direct contact with the patch
– Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
– Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
– Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
– Let the garment cool completely before wearing
– Hot Leathers- Established 1983 (The Leader In Motorcycle Apparel)
All Hot Leathers patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
– Identify where you want the patch and outline the area with tailor’s chalk
– Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
– Position your inside hand so it is resting flat between the lining and outlines area
– Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
– Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
– This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
– Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
– Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
– Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
– Preheat your iron to 325-335 degrees. Do Not Use Steam.
– Press the area where you want your patch to be for 25 seconds
– Position the patch on the garment so that it is positioned where you would like it to be
– Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure on the area for 15 seconds
– The iron should never come into direct contact with the patch
– Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
– Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
– Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
– Let the garment cool completely before wearing
– Hot Leathers- Established 1983 (The Leader In Motorcycle Apparel)
Reviews
"Shipping was faster than I expected. Battery lasts a full day of use. I use it in the garage most evenings. Exactly what I needed."
"Chose the stainless version and the stitching has held up better than expected. Brought it to a tailgate and it performed. I'm in Pittsburgh, PA. Pleasantly surprised."
"Picked the red option and the stitching has held up better than expected. It keeps up with my home office setup. Took a minute to snap together, fits great now. Happy with my purchase."
"Bought the starter kit and the grip is comfortable for long sessions. Took it to the lake house for the weekend. One minor scuff on the corner, purely cosmetic. I'm in Kansas City, MO. Glad I went with this one."
"Got the white finish and the grip is comfortable for long sessions. Brought it camping and it held up fine. Five stars from me."
"Went with the small and it heats up fast and evenly. Running it through my routine for a month. Five stars from me."
"Bought the starter kit and setup took me less than five minutes. I keep it in the car for road trips. Took a day longer than estimated to arrive, no big deal. I'm in San Diego, CA. Shipping was quick and the item delivered."
"Picked the red option and the build quality is better than the photos suggested. Used it for a week of meal prep. Exactly what I needed."
"Got the white finish and the build quality is better than the photos suggested. Carried it through a busy work week. Definitely a repeat customer after this."
"Went with the small and the screen is sharp and bright in daylight. Used it during a move and nothing shifted. Instructions could be a bit clearer, but I figured it out. Would recommend."
Related products
Hot Leathers All I Care About 4″x2″ Patch PPL9494
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9160 Hold My Beer 4″ Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9213 Press 1 4″ Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9267 Tattooed for Life Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9429 I’ll Make You Famous Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Milwaukee Leather MP8830 Ladies Distress Brown Leather Chain Strap Shoulder Bag
Original price was: $104.99.$31.99Current price is: $31.99.
Reviews
There are no reviews yet.