Hot Leathers Gulf War Vet Banner 4″ x 1″ Patch PPM2105
Original price was: $13.95.$10.00Current price is: $10.00.
All Hot Leathers patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
– Identify where you want the patch and outline the area with tailor’s chalk
– Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
– Position your inside hand so it is resting flat between the lining and outlines area
– Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
– Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
– This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
– Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
– Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
– Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
– Preheat your iron to 325-335 degrees. Do Not Use Steam.
– Press the area where you want your patch to be for 25 seconds
– Position the patch on the garment so that it is positioned where you would like it to be
– Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure on the area for 15 seconds
– The iron should never come into direct contact with the patch
– Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
– Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
– Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
– Let the garment cool completely before wearing
– Hot Leathers- Established 1983 (The Leader In Motorcycle Apparel)
All Hot Leathers patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
– Identify where you want the patch and outline the area with tailor’s chalk
– Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
– Position your inside hand so it is resting flat between the lining and outlines area
– Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
– Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
– This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
– Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
– Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
– Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
– Preheat your iron to 325-335 degrees. Do Not Use Steam.
– Press the area where you want your patch to be for 25 seconds
– Position the patch on the garment so that it is positioned where you would like it to be
– Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure on the area for 15 seconds
– The iron should never come into direct contact with the patch
– Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
– Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
– Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
– Let the garment cool completely before wearing
– Hot Leathers- Established 1983 (The Leader In Motorcycle Apparel)
Reviews
"Went with the small and the weight feels balanced and premium. I use it in the garage most evenings. I'm in Seattle, WA. Would buy again."
"Got the charcoal one and the zipper glides without catching. Tested it through a full week of rain. Worth the money."
"Came earlier than the promised date. Used it for a week of meal prep. Button is a bit stiff at first but loosens up with use. Definitely a repeat customer after this."
"Order processed quicker than the estimate. Connectors click in securely. It's been my go-to for morning coffee runs. Five stars from me."
"Tracking info was accurate the whole way. Stitching held up better than expected. Brought it camping and it held up fine. Packaging tape was loose on one end, product was fine. I'm in Salt Lake City, UT. No complaints so far."
"Order processed quicker than the estimate. Used it on my commute all month. Customer service was helpful when I had a question."
"Picked the blue one and it heats up fast and evenly. I keep it in the car for road trips. Happy with my purchase."
"Bought the starter kit and the finish is clean with no rough edges. Running it through my routine for a month. Solid deal, no regrets."
"Bought the starter kit and the battery easily lasts a full day of use. It's handled my daily dog walks without issue. Wish it came in more colors, otherwise great. Shipping was quick and the item delivered."
"Came earlier than the promised date. It's handled my daily dog walks without issue. Packaging tape was loose on one end, product was fine. Exactly what I needed."
Related products
Hot Leathers Not All Those Who Wander 4″x1″ Patch PPL9526
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9213 Press 1 4″ Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9245 Gun Control Target Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9429 I’ll Make You Famous Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9482 Pentagram Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9490 Injured Inside Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Reviews
There are no reviews yet.