Hot Leathers Tuberias Loup Salvar 4″x2″ Patch PPL9650
Original price was: $13.95.$10.00Current price is: $10.00.
All Hot Leathers patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
– Identify where you want the patch and outline the area with tailor’s chalk
– Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
– Position your inside hand so it is resting flat between the lining and outlines area
– Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
– Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
– This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
– Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
– Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
– Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
– Preheat your iron to 325-335 degrees. Do Not Use Steam.
– Press the area where you want your patch to be for 25 seconds
– Position the patch on the garment so that it is positioned where you would like it to be
– Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure on the area for 15 seconds
– The iron should never come into direct contact with the patch
– Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
– Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
– Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
– Let the garment cool completely before wearing
– Hot Leathers- Established 1983 (The Leader In Motorcycle Apparel)
All Hot Leathers patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
– Identify where you want the patch and outline the area with tailor’s chalk
– Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
– Position your inside hand so it is resting flat between the lining and outlines area
– Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
– Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
– This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
– Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
– Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
– Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
– Preheat your iron to 325-335 degrees. Do Not Use Steam.
– Press the area where you want your patch to be for 25 seconds
– Position the patch on the garment so that it is positioned where you would like it to be
– Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure on the area for 15 seconds
– The iron should never come into direct contact with the patch
– Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
– Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
– Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
– Let the garment cool completely before wearing
– Hot Leathers- Established 1983 (The Leader In Motorcycle Apparel)
Reviews
"Arrived in perfect condition, well protected. The color matched the listing exactly. It's handled my daily dog walks without issue. No complaints so far."
"Got the navy version and the finish is clean with no rough edges. Used it for a week of meal prep. I'm in Houston, TX. Definitely a repeat customer after this."
"Shipping was faster than I expected. Battery lasts a full day of use. I use it in the garage most evenings. Exactly what I needed."
"Chose the larger size and the color matched the listing exactly. Used it on my commute all month. I'm in Minneapolis, MN. Customer service was helpful when I had a question."
"Chose the larger size and the sound is clear without any static. Used it during a move and nothing shifted. The box was a little beat up but the item inside was perfect. I'm in Boston, MA. Shipping was quick and the item delivered."
"Bought the starter kit and the fabric is surprisingly breathable. Took it to the lake house for the weekend. Instructions could be a bit clearer, but I figured it out. I'm in Tampa, FL. Glad I went with this one."
"Ordered the refurbished unit and the grip is comfortable for long sessions. Used it at the desk for video calls all month. Shipping was quick and the item delivered."
"Ordered the 3-pack on sale and the color matched the listing exactly. It lives in my gym bag now. Worth the money."
"Chose the stainless version and the screen is sharp and bright in daylight. It lives in my gym bag now. I'm in Chicago, IL. Worth the money."
"Ordered the refurbished unit and the fabric is surprisingly breathable. It's handled my daily dog walks without issue. The box was a little beat up but the item inside was perfect. Worth the money."
Related products
Hot Leathers All I Care About 4″x2″ Patch PPL9494
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers Not All Those Who Wander 4″x1″ Patch PPL9526
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9160 Hold My Beer 4″ Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9182 Support Your Local Shop 4″ Patch
Original price was: $15.95.$10.00Current price is: $10.00.
Hot Leathers PPL9213 Press 1 4″ Patch
Original price was: $15.95.$10.00Current price is: $10.00.
ZanHeadgear TL197 Motley Tube SportFlex Series Black & Orange Classic Bandana
Original price was: $39.99.$11.99Current price is: $11.99.
Reviews
There are no reviews yet.